Ski-Doo WAKE Series - Manual (Page 61)

CONTROLS/INSTRUMENTS/EQUIPMENTS
NOTICE Never use the ski/
wakeboard post to tow other crafts.
Respect the maximum load limit rat-
ing of the ski/wakeboard post. Over-
loading can affect maneuverability,
stability and performance.
Wakeboard Rack
WAKE Models
Convenient removable rack to carry a
wakeboard.
To install:
NOTE: Wakeboard rack can be in-
stalled on both sides of watercraft.
1. Position rack on bumper trim with
its centerline in between the buckle
receivers located in the footwell
area.
2. Position the 2 outer J-hooks of the
rack so as to grab the fiberglass lip
of the hull underneath the bumper
trim.
F18L3DY
2°
1°
3. Attach the male buckles onto the
buckle receivers located in the
footwell.
F18L3EY
4. Tighten the straps by firmly pulling
upwards.
F18L3FY
5. Double-check that rack is properly
installed by giving it a tug.
WARNING
If rack is not properly secured on
the watercraft, it could become
loose and detach unexpectedly,
creating a risk of injury to people
nearby. To avoid:
– Ensure straps are in good condi-
tion.
– Secure rack properly on water-
craft.
– Periodically check that straps
are tight.
_______________
59