SANRAD I3.1.1205 - Manual (Page 194)

10-8 SANRAD V-Switch CLI User Manual
Changing a User Profile
If you are working in
a V-Switch cluster, a
user profile must be
changed on both V-
Switches
This interactive command enables a user to change their login password
for their user name on the V-Switch.
admin password
After entering the command, you are prompted to enter your existing
password and the new password.
Removing a User Profile
If you are working in
a V-Switch cluster, a
user profile must be
changed on both V-
Switches
You can remove any user profile from the V-Switch database except the
profile you are logged in with. This ensures at least one user profile in the
database at all times.
admin remove
You must define one parameter to remove a user profile:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-un USER NAME USER NAME MANDATORY Joe Cool
Example:
admin remove –un Joe Cool
V-Switch
Resetting a V-Switch
You can perform a remote soft reset on the V-Switch using the CLI reset
command. All configuration databases will be maintained on the V-Switch,
including user names and passwords; network port aliases; configured
volumes and iSCSI targets.
reset