Sony 4-144-907-43(1) - Manual (Page 25)

25 GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\030CON_GB.fm masterpage: Right
STR-DA3500ES
4-144-907-43(1)
Getting Star
ted
4b: Connecting the video components
This section describes how to hook up your
components to this receiver. Before you begin,
see “Component to be connected” below for
the pages which describe how to connect each
component.
Before connecting cords, be sure to disconnect
the AC power cord (mains lead).
After hooking up all your components,
proceed to “5: Connecting the antennas
(aerials)” (page 36).
If you want to connect several
digital components, but cannot
find an unused input
See “Enjoying the sound/images from other
inputs” (page 94).
Notes
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cord.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling
frequencies.
The image quality depends on the connecting
jack. See the illustration that follows. Select
the connection according to the jacks on your
components.
Note
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
How to hook up your
components
Component to be connected Page
TV 19
With HDMI jack 26
DVD player 29
Blu-ray disc player 30
Satellite tuner, Set-top box 31
DVD recorder, VCR 32
Camcorder, video game, etc. 32
Video input/output jacks to be
connected
High quality image
Digital Analog