Sony 4-144-907-43(1) - Manual (Page 58)

58 GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\050AMP_GB.fm masterpage: Left
STR-DA3500ES
4-144-907-43(1)
• AMP
The HDMI audio signals from the playback
component is only output to speakers
connected to the receiver. The multi channel
sound can be played back as it is.
Note
Audio signals are not output from the TV’s
speakers when “Audio Out” is set to “AMP”.
x 24p Auto Sound Sync
(24p Auto Sound Sync)
Lets you turn the “24p Auto Sound Sync”
function on or off. This allows HD-D.C.S. to
be selected as the optimum sound field
automatically when 24p (24 frames per
second) signal are input from a playback
component, such as a Blu-ray disc player.
• OFF
• ON
Note
When “Control for HDMI” is set to “ON”, the
receiver detects the 24p signals via “BRAVIA”
Sync. Therefore, if a player that is not compatible
with “BRAVIA” Sync sends out 24p signals, the
receiver will not switch the sound field to
HD-D.C.S. On the other hand, when “Control for
HDMI” is set to “OFF”, the receiver detects the 24p
signals by itself.
x Subwoofer Level
(Subwoofer level for HDMI)
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each HDMI input independently.
• 0 dB
• +10 dB
• AUTO
The subwoofer level is automatically set to
0 dB or +10 dB depending on the frequency.
Settings for the system
(System settings menu)
You can use the System settings menu to
customize the settings of the receiver. Select
“System” in the Settings menu. For details on
adjusting the parameters, see “7: Operating the
receiver using the GUI (Graphical User
Interface)” (page 40).
x Screen Saver (Screen Saver)
Lets you activate the screen saver function for
the GUI menu on the TV connected to the
receiver.
• OFF
The screen saver function is disabled.
• ON
When there has been no operation attempted
for 15 minutes, the screen saver function is
activated automatically.
x Installer Mode (Installer Mode)
Lets you select the control mode for
maintenance and service.
• OFF
• RS232C
x Language (Language)
Lets you select the language for the GUI menu
on the TV connected to the receiver.
• English
• Español
• Français
• Deutsch
System settings menu
parameters