Sony 4-144-907-43(1) - Manual (Page 89)

89 GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm masterpage: Right
STR-DA3500ES
4-144-907-43(1)
Other Oper
ations
Enjoying the sound/
images from the
components connected to
the DIGITAL MEDIA PORT
The DIGITAL MEDIA PORT is for enjoying
sound/images from a portable audio/video
source or computer by connecting a DIGITAL
MEDIA PORT adapter.
For details on connecting the DIGITAL
MEDIA PORT adapter, see “Connecting
components with digital audio input/output
jacks” (page 21).
Sony offers the following DIGITAL MEDIA
PORT adapters:
• TDM-BT1/BT10 Bluetooth™ Wireless
Audio Adapter
• TDM-NW10 DIGITAL MEDIA PORT
Adapter
• TDM-NC1 Wireless Network Audio Client
• TDM-iP10/iP50 DIGITAL MEDIA PORT
Adapter
• TDM-MP10 DIGITAL MEDIA PORT
Adapter
The DIGITAL MEDIA PORT adapter is an
optional product.
Notes
• Do not connect an adapter other than the DIGITAL
MEDIA PORT adapter.
• Before disconnecting the DIGITAL MEDIA PORT
adapter, make sure to turn the receiver off using the
remote.
• Do not connect or disconnect the DIGITAL
MEDIA PORT adapter to/from the receiver while
the system is turned on.
• Depending on the type of DIGITAL MEDIA
PORT adapter, the images are also output.
• The DIGITAL MEDIA PORT adapters are
available for purchase depending on the area.
You can select an operation screen using the
GUI menu, depending on the DIGITAL
MEDIA PORT adapter you want to use. For
some adapter, such as TDM-BT1, the
operation screen is fixed and you cannot
change it on the GUI screen.
1
Press GUI MODE repeatedly to
select “GUI ON”.
The GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
“Music” or “Video”, then press
or b.
3
Press or b.
The component connected to the
DIGITAL MEDIA PORT adapter is
recognized and “DMPORT” on the screen
will change to the component’s name.
The category of the component connected
to DIGITAL MEDIA PORT adapter
appears on the TV screen.
Note
An icon which shows the component
recognized is displayed on the TV screen. If
the component connected to the adapter cannot
be recognized, “DMPORT” is displayed on the
TV screen.
Selecting an operation screen
to operate the component
connected to the DIGITAL MEDIA
PORT adapter
MENU OPTIONS
,
V/v/B/b
GUI
MODE
continued