Silex technology WLAN MODULE SX-550 - Manual (Page 29)

silex Page 23
Part Number 40183-101
Chapter 5:
Accessing Configuration Parameters
The SX-550 is equipped with a default configuration that works with most serial-to-Ethernet and wireless
connections. You can modify the settings to suit your installation requirements by accessing:
• ExtendView Utility
• HTTP Pages Using Web Browser
• Internal Command Console
If using Microsoft Windows operating systems, the ExtendView Utility is the recommended method of
configuring SX-550 modules on your network. If using UNIX operating systems, accessing the HTTP
pages using a web browser is the recommended method. If using a wireless SX-550 module, you can
use an Ethernet or wireless connection.
In addition, the SX-550 module is compatible with network management systems using SNMP MIBs I and
II protocol. The SX-550 module also supports a proprietary MIB that allows customization and monitoring.
Once you have installed and accessed the configuration software, continue to Chapter 4: Setting
Configuring Parameters for information on the configuration parameters.
Access ExtendView Utility
The 32-bit Windows-based TCP/IP utility, ExtendView Utility, is used to configure and manage the serial
port, network and wireless settings. You can view and configure all servers on the network simultaneously
or individually.
Table 14 describes the system requirements for installing the ExtendView Utility.