Silex technology WLAN MODULE SX-550 - Manual (Page 69)

Console Commands silex Page 63
Part Number 40183-101
Command Description
Sample output:
SET PORT S1 SPEED <baudrate>
SET PORT S1
STOP Sets serial port stop bits per character
The default value is 1.
Sample output:
SET PORT S1 STOP [1 | 2]
Server Information Commands
Table 41 Server Information Commands
Command Description Sample Output
SET SERVEr
DEscription Sets server description string
Sample output:
SET SERVEr DEscription <description-string>
SET SERVEr NAme Sets server node name
The default value is TWC_xxxxxx, where xxxxxx are the last 6 hex digits of the
MAC address.
Sample output:
SET SERVEr NAme <name>
SET SNMP GETCOMM Gets community name
The default value is public.
Sample output:
SET SNMP GETCOMM <string>
SET SNMP JETADmin Enables or disables JetAdmin compatibility
The default value is enabled.
Sample output:
SET SNMP JETADmin [ ENable | DIsable]
SET SNMP
SETCOMM1 Sets community 1 name
The default value is internal?
Sample output:
SET SNMP SETCOMM1 <string>
SET SNMP
SETCOMM2 Sets community 2 name
The default value is Pass.
Sample output:
SET SNMP SETCOMM2 <string>
SET SNMP CONtact Sets system contact string
The default value is null.
Sample output:
SET SNMP CONtact <string>