Silex technology WLAN MODULE SX-550 - Manual (Page 74)

Page 68 silex Console Commands
Part Number 40183-101
Command Description
3 Text to PostScript
4 PostScript Tagged Binary
5 DC1 Special
TCP/IP Commands
Table 44 TCP/IP Commands
Command Description
SET IP ACcess Allows or prevents access to a block of remote addresses
The default value is empty list.
Sample output:
SET IP ACcess [EN | DI | ALL] aa.bb.cc.dd {MAsk
ee.ff.gg.hh]
SET IP RANge Allows or prevents access to a range of remote addresses
The default value is empty list.
Sample output:
SET IP RANge [EN | DI | ALL] aa.bb.cc.dd {MAx
ee.ff.gg.hh]
SH IP ACcess Displays current access list settings
Sample output:
All hosts permitted access
SET IP ADdress Sets server IP address
The default value is 192.0.0.192
Sample output:
SET IP ADdress aa.bb.cc.dd
SET IP ARP
ENable Enables or disables setting of IP address with an ARP packet
The default value is Enable.
Sample output:
SET ARP [ENable | DIsable]
SET IP BAnner Enables or disables printing of job banner on LPD jobs
The default value is Disable.
Sample output:
SET IP BAnner [ENable | DIsable]
SET IP CHKSUM Enables or disables verification of IP checksum on received packets
The default value is Enable.
Sample output:
SET IP CHKSUM [ENable | DIsable]
SET IP BOot Sets number of tries for each enabled IP boot method, if not set to static