Silex technology WLAN MODULE SX-550 - Manual (Page 42)

Page 36 silex Setting Configuration Parameters
Part Number 40183-101
Parameter Setting
Stop Bits Sets the number of extra bits that mark the end of a unit of
transmission.
Values are:
1 (default), 2
Flow Control Manages data flow between computers or devices so data can be
handled at an efficient pace.
Values:
None (default), Xon, Xoff, CTS/RTS
4. To accept changes, click OK.
To cancel, click Cancel.
For additional help, click Help.
N OTE : You can configure the same settings using the Web Page configuration. Simply log in using the
SX-550 IP address and select the I/O ports. For the changes to become effective, submit the changes,
then reset the device.
Modifying TCP/IP Settings
You can modify the TCP/IP settings using ExtendView (recommended), the web browser interface or the
SX-550 module’s internal configuration console.
To modify TCP/IP settings:
1. Using ExtendView, web browser interface or internal command console, click the TCP/IP tab. The
TCP/IP window displays.
Figure 18 TCP/IP Window