SUPER MICRO Computer 5010E - Manual (Page 12)

S UPER S ERVER 5010H/5010E Manual
1-2
1-2 Server Chassis Features
The SuperServer 5010H/5010E is a high-end, scaleable 1U rackmount
server platform designed with today's most state-of-the-art features. The
following is a general outline of the main features of the SC810 chassis.
System Power
When configured as a SuperSever 5010H/5010E, the SC810 chassis in-
cludes a 200W power supply.
SCSI Subsystem (5010H only)
The SCSI subsystem supports two 80-pin SCA Ultra160 SCSI hard drives.
(Any standard 1" drives are supported. SCA = Single Connection Attach-
ment.) The SCSI drives are connected to an SCA backplane that provides
power, bus termination and configuration settings. The SCSI drives are
also hot-swap units.
Control Panel
The SC810's control panel provides important system monitoring and control
information. LEDs indicate power on, network activity, hard disk drive ac-
tivity and system overheat conditions. The control panel also includes a
main power button and a system reset button.
l
One (1) 5V 32-bit, 33 MHz PCI riser card
l
Rackmount hardware (with screws):
Two (2) rack rail assemblies
Six (6) brackets for mounting the rack rails to a rack/telco rack
l
One (1) CD-ROM containing drivers and utilities:
Intel's Ô LANDesk Client Manager
LAN driver
SCSI driver (5010H only)
l
SuperServer 5010H/5010E User's Manual
* Type and number depends upon the configuration ordered.