SUPER MICRO Computer 5010E - Manual (Page 88)

S UPERSERVER 5010H/5010E User's Manual
7-16
BIOS
7-5 Chipset Setup
Choose Chipset Setup from the AMIBIOS Setup Utility main menu. The screen
is shown below. All Chipset Setup options are described following the
screen. You can use this screen to select options for the GHCH
Configuration.
GMCH Configuration
You can use this screen to select options for the GMCH Configuration. Use
the up and down arrow keys to select an item, and the plus (+) and minus
(-) keys to change the option setting. The settings are described on the
following pages.
Primary Video Device
This option specifies the primary display device on your system. Settings
include Internal, External PCI, External AGP and Auto. Auto: This setting
allows the BIOS to select the primary video device at bootup. Internal: This
setting allows the onboard video display adapter to be the primary video
BIOS SETUP UTILITY
Main Advanced Chipset PCIPnP Power Boot Security Exit
> GMCH Configuration
> ICH Configuration
Processor Serial Number
[Disabled]
CPU Latency Timer [Disabled]
C000,16k Shadow
[Cached/WP]
C400,16k Shadow [Cached/WP]
C800,16k Shadow [Disabled]
CC00,16k Shadow [Disabled]
D000,16k Shadow [Disabled]
D400,16k Shadow [Disabled]
D800,16k Shadow [Disabled]
DC00,16k Shadow [Disabled]
Options for MCH
↔
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.
device at bootup. External PCI: This setting allows a PCI Display Adapter
card to be the primary video device at bootup. External AGP: This setting
allows an AGP Display Adapter to be the primary video device at bootup.
2