Sony SLV-AV100C - Manual (Page 39)

39 Getting Started
Getting Started
This unit’s VCR is capable of receiving VHF channels 2 to 13, UHF
channels 14 to 69 and unscrambled CATV channels 1 to 125. First, we
recommend that you preset the receivable channels in your area using
automatic presetting. Then, if there are any unwanted channels, disable
them manually. If you have decided which channels you wish to preset,
set them directly using manual presetting.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the VCR channel (channel 3 or 4). If your TV is
connected to the VCR using V connections, set the TV to video input.
• Press TV/VTR to display the VTR indicator in the VCR’s display
window.
• Press VHS TUNER so that a channel number appears in the VCR’s
display window.
Presetting all receivable channels automatically
1 Press MENU. Then press CURSOR >/. to move the cursor (I) to
VHS MENU, and press EXECUTE.
2 Press CURSOR >/. to move the cursor (I) to TUNER PRESET and
press EXECUTE.
When using the EASY SET UP procedure, skip this step.
3 • To preset cable TV channels:
Press CURSOR ?// to set ANTENNA/CABLE to CABLE.
• To preset VHF and UHF channels:
Press CURSOR ?// to set ANTENNA/CABLE to ANT.
Presetting channels
(Skip this section if you are
using cable box/DSS receiver
control.)
MENU
EXECUTE
CURSOR
>/./?//
TUNER PRESET CH2
CABLE ANT ANTENNA / CABLE
AUTO PRESET
MANUAL SET
ADD / ERASE :
ERASE ADD
AFT OFF ON
FINE TUNING
SELECT CH : 0 – 9 , ENTER
TUNER PRESET CH1
CABLE ANT ANTENNA / CABLE
AUTO PRESET
MANUAL SET
ERASE ADD
AFT OFF ON
FINE TUNING
SET :
SELECT :
TUNER PRESET CH2
CABLE ANT ANTENNA / CABLE
AUTO PRESET
MANUAL SET
ERASE ADD
AFT OFF ON
FINE TUNING
SET :
SELECT :
continued