Sony SLV-AV100C - Manual (Page 69)

69 Audio/Video Equipment Operations
Customizing the remote commander for a DAT
deck
The remote commander is not factory set to control DAT decks. So you
need to customize the function button corresponding to the jacks the
DAT deck is connected to. For example, if you connect the DAT deck to
the TAPE/MD jacks, customize TAPE/MD for the DAT deck in the
following way.
While pressing the function button (e.g. TAPE/MD), press number
button 2.
The function button is customized to control the DAT deck.
You can customize the VIDEO 1, VIDEO 2, CD, TAPE/MD, or TV
function buttons. To change the button’s function again, see
“Customizing the remote commander function buttons” on page 91.
Playing a tape
1 Press the function button you customized for the DAT deck, and turn
on the DAT deck.
The unit turns on and switches the input source to the jacks the DAT
deck is connected to.
2 Press 6 OPEN/CLOSE to open the cassette cover/holder.
If the cassette cover/holder doesn’t open, refer to your DAT deck’s
operating instructions.
3 Insert a cassette.
4 Press · PLAY.
The deck starts playing a tape.
Additional tasks
To
Stop playing
Go to the next track
Go to the preceding track
Fast-forward or rewind
Monitor the sound during
fast-forward or rewind
Eject the cassette
Controlling a DAT
deck
continued
1 2 3
4 5 6
7 8 9
0 >10
) FF/0 REW
P PAUSE
p STOP
· PLAY
Press
p STOP
+ AMS
= AMS
) FF or 0 REW during stop
) FF or 0 REW during playback.
To resume normal playback, release
the button.
6
OPEN/CLOSE during stop
r REC
6 OPEN/CLOSE
=/+ AMS
6 OPEN/
CLOSE