Sony SLV-AV100C - Manual (Page 78)

Sound Field Operations 78
Customizing the
sound fields
Each sound field is composed of an equalizer (bass, midrange, and
treble) and surround sound parameters: sound variables that create the
sound image. You can customize the sound fields by adjusting the
speaker levels, effects, and surround sound parameters to suit your
listening situation.
Once you customize the sound fields, they are stored in memory.
Adjusting the speaker level for THEATER, MONO
MOVIE, HALL, STADIUM, or GAME
1
Start playing a program source,
then repeat steps 1 through 4 in
“Using the pre-programed sound
fields” on page 49 and select one
of the above sound fields in step 3.
2
Press CURSOR >/./?// to move
the cursor (I) to SUR EDIT, then
highlight LEVEL.
3
Press EXECUTE. Then, press
CURSOR >/. to move the cursor to
CENTER, and press CURSOR ?//
to increase or decrease the
volume of the center speaker to a
preferable level.
If you select MONO MOVIE, HALL,
STADIUM, or GAME in step 1, skip this
step.
If you select THEATER in step 1, and
you set the center mode to PHANTOM
(see “Selecting the center mode” on
page 32), skip this step.
4
Press CURSOR >/. to move the
cursor (I) to REAR, then press
CURSOR ?// to increase or
decrease the volume of the rear
speakers to a preferable level.
If you select THEATER in step 1 and
3CH LOGIC is selected as the center
mode (see “Selecting the center mode”
on page 32), skip this step.
The rear speakers’ volume balance is
always even.
5
Press MENU to return to the
original screen.
MENU
EXECUTE
CURSOR
>/./?//
Tips
• To adjust the relative
volume balance between the
front left and right speakers,
use BALANCE L/R on the
unit.
• To restore the factory
settings of the sound fields,
turn on the unit while
pressing SURROUND.
SET
SELECT :
:
SOUND SET
SOUND FIELD
ON
LEVEL
OFF
EFFECT
TONE EDIT
BASS BOOST
SUR EDIT
THEATER
CENTER MODE
EXECUTE ,
SET
SELECT :
:
SOUND SET
SOUND FIELD
ON
LEVEL
OFF
EFFECT
TONE EDIT
BASS BOOST
SUR EDIT
THEATER
CENTER MODE
EXECUTE
CENTER
RETURN
SUR EDIT LEVEL
REAR
+ 10
0
dB
dB
SET :
SELECT :
CENTER
RETURN
SUR EDIT LEVEL
REAR
+
+ 10
10 dB
dB
SET :
SELECT :