Sony RM-VL1400T - Manual (Page 11)

11 GB
Other Useful Functions
Operating the Remote Commander in
the dark
COMPONENT
Press the (light) button to turn on the button
illumination of the Remote Commander. Press the
(light) button again to turn off.
If no button is pressed for over 10 seconds, the button
illumination of the Remote Commander automatically
turns off.
Default button illumination settings
Off-time setting 10 seconds
Brightness Level 15 (maximum)*
Fade effect On
On-mode setting All buttons
* The Brightness level is preset to 15 (maximum) at the factory.
If you use the Remote Commander with this setting, battery
life may be shorter.
See “Setting the button illumination” (page 24) to change
the button illumination settings.
Locking the controls
—Hold function
To prevent accidental operation, you can lock all the
buttons with the Hold function.
1
While pressing the (light) button, press
the SCROLL button.
The following message appears on the screen and all
the buttons are locked.
(light)
button
Checking the button function
—Labelling function
When you press a button, its function appears in the
second line on the screen while transmitting the remote
control signals.
You can also display the function without transmitting
the remote control signals.
To change the characters displayed on the screen, see
“Changing the characters on the screen” (page 15).
1
While pressing the (light) button, press
the desired button.
The button function appears on the second line of the
screen. The remote control signals are not
transmitted.
Button function
To unlock the controls
While pressing the (light) button, press the SCROLL button.