Sony RM-VL1400T - Manual (Page 9)

9 GB Continued
4
Press the PROGRAM + or PROGRAM –
button, then press the 1 (power) button
repeatedly until the A/V component reacts
as follows:
TV: Powers off.
Amplifier: Powers off or the volume turns up.
CD player, MD deck, Casssette deck: Powers off
or starts playing.
Other component: Powers on
5
Press the OK button or centre Label select
button.
A beep sounds, and the four-digit preset code you
have set and “OK” appear on the screen, then the
display returns to the screen shown in step 2.
6
To set other A/V components, repeat steps
3-5.
7
Press the (light) button or the RETURN
button twice.
The set mode closes, and the Remote Commander
returns to standby for operating the A/V components.
Operating your A/V
components with the
Remote Commander
Select the desired A/V component by pressing the
COMPONENT select button on the Remote Commander,
then operate the A/V component.
Selecting the desired A/V component
Press the COMPONENT select button to select the
desired A/V component.
If you press the OTHER button, selectable A/V
components appear on the screen. Select the desired A/V
component by pressing the corresponding Label select
button. The A/V components displayed on the screen
change by pressing the OTHER button repeatedly.