Sony RM-VL1400T - Manual (Page 28)

28 GB
Resetting the settings
Resetting a COMPONENT select
button or Label select button
You can reset the A/V component settings to the factory
preset.
1
While pressing the (light) button, press
the OTHER button.
“SET MODE” appears as the screen title.
2
Press the V/v buttons to select
“7 RESET”, then press the OK button or
the centre Label select button.
“RESET” appears as the screen title.
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
3
Press the V/v buttons to select
“1 COMPONENT”, then press the OK
button or the centre Label select button.
“COMPONENT” appears in the second line on the
screen.
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
4
Press the COMPONENT select button or
Label select button you want to reset.
A beep sounds and all the settings on the selected
component are reset to the factory settings.
5
Press the (light) button or the RETURN
button three times.
Setting is complete and the Remote Commander
returns to the status before you started setting.
Resetting all settings
You can reset all settings to the factory preset.
1
While pressing the (light) button, press
the OTHER button.
“SET MODE” appears as the screen title.
2
Press the V/v buttons to select
“7 RESET”, then press the OK button or
the centre Label select button.
“RESET” appears as the screen title.
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
3
Press the V/v buttons to select “2 ALL”,
then press the OK button or the centre
Label select button.
“RESET ALL SETTINGS?” appears in the second
line on the screen, and “NO” is shown inside the [ ].
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.