Sennheiser evolution wireless series EM 100 - Manual (Page 22)

Using the receiver
21
To transfer the parameters:
̈
Switch the transmitter and the receiver on.
̈
Press the button
³
on the receiver.
“ Sync ” appears on the display panel of the receiver.
̈
Place the infra-red interface of the transmitter (see the instruction
manual of the transmitter) in front of the infra-red interface
·
of the
receiver.
The parameters are transferred to the transmitter. When the transfer
is completed, “
” appears on the receiver’s display panel. The receiver
then switches back to the current standard display.
To cancel the transfer:
̈
Press the STANDBY button
²
on the receiver.
“ ” appears on the display panel of the receiver. “ ” also appears if no
suitable transmitter was found.
·
³
·
³