Sennheiser evolution wireless series EM 100 - Manual (Page 40)

Adjustment tips and functions
39
Selecting a channel
and assigning this
channel a receiving
frequency
̈
Set the desired channel.
̈
Set the desired frequency.
Changing the settings of the guitar tuner
The following settings are available:
̈
Press the UP/DOWN button until the “ Tune ” menu item
appears.
̈
Keep the SET button pressed until the channel selection
appears.
̈
Press the SET button.
The frequency selection appears.
̈
Press the SET button.
Your settings are stored. You are back to the operating menu.
SET
“Stored”
Advanced Menu
544.200 MHz
Tune
Tune
B.Ch: U. 1
544.200 MHz
Tune
Call up “Tune”
(special function)
Select the channel Set the frequency;
store the setting
SET SET
SET
PEAK
-10
0 40
25
10
-20
-30
AF RF
PEAK
-10
0 40
25
10
-20
-30
AF RF
PEAK
-10
0 40
25
10
-20
-30
AF RF
544 .200 MHz
B.Ch: U. 1
SET
SET
Tune
Guitar Tuner
Pilot Tone
LCD Contrast
Reset
Software Revision
Exit
Advanced Menu
Setting Meaning
“ Inactive “ The “ Guitar Tuner ” standard display is deactivated
(see page 24).
“ Active “ When selecting the “ Guitar Tuner ” standard display
(see page 24), the receiver is not muted.
“ Audio Mute “ When selecting the “ Guitar Tuner ” standard display
(see page 24), the receiver is muted.