Sennheiser evolution wireless series EM 100 - Manual (Page 37)

Adjustment tips and functions
36
Entering a name
Via the “ Name ” menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver.
The name is displayed on the “ Receiver Parameters ” standard display and
can consist of up to eight characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Adjusting the audio output level
Adjustment range: –24 dB to +24 dB, adjustable in 3-dB steps
Via the “ AF Out ” menu item, you can adjust the level of the audio output
AF OUT from the receiver to the input of the connected device. The
following figures are a guide to the best settings:
Gain values greater than +18 dB should only be used when the audio
modulation from the transmitter is at a low level, otherwise the audio
output of the receiver may become clipped and distorted.
Squelch
Easy Setup
Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
̈
Press the UP/DOWN button to select a character.
̈
Press the SET button to change to the next segment/character
or to store the complete entry.
“Stored”
Menu
Lichael
Name
Name
Michae l
Name
Call up “Name” Enter a character
and confirm
Enter a character;
store the setting
SET SET
SET
PEAK
-10
0 40
25
10
-20
-30
AF RF
PEAK
-10
0 40
25
10
-20
-30
AF RF
PEAK
-10
0 40
25
10
-20
-30
AF RF
L ichael
SET
Squelch
Easy Setup
Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
Connected device Guide values for “AF Out”
Line 0 to +18 dB (+24 dB)
Microphone
−24 dB to −6 dB