22 connecting two vcrs for tape editing – Sony KDP 65XBR2 User Manual
Page 32
Setting Up the Projection TV
22
Connecting Two VCRs for Tape Editing
The SELECT OUT jacks allow you use a second VCR to record a
program being played by the primary VCR to edit and dub tapes.
1
Using an A/V cable, connect the playback VCR’s Audio and
Video OUT jacks to the projection TV’s Audio and Video IN
jacks.
2
Using an A/V cable, connect the recording VCR’s Audio and
Video IN jacks to the projection TV’s SELECT OUT jacks.
3
If necessary, change the video input on your VCR. (For details,
see your VCR’s instruction guide.)
To do tape editing
❑
Press
TV/VIDEO
on the remote control to select the playback VCR.
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VCR (recording)
VCR (playback)
TV
A/V cable
A/V cable
✍
You can select the output signal from the SELECT OUT jacks in the Setup menu.
For details, see page 65.