Sony KDP 65XBR2 - Manual (Page 46)

Setting Up the Projection TV
36
Adjusting the Convergence Automatically (Flash Focus)
The projection tube image appears on the screen in three colors (red,
green and blue). If they do not converge, the color is poor and the
picture blurs.
Before you use your projection TV, be sure to adjust the convergence.
The Flash Focus feature allows you to adjust the convergence
automatically.
1 Tune to a TV or cable TV program.
2 Press FLASH FOCUS on the front panel of the projection TV (see
page 13).
The cross pattern appears and Flash Focus begins to work. The
adjustment is completed when the TV picture returns.
To Obtain Optimum
Convergence for
Digital TV Programs The optimum convergence alignment varies with digital TV formats.
Whenever you find that the picture blurs, press
FLASH FOCUS .
✍
It is recommended that you perform Flash Focus about 30 minutes after the
projection TV is first turned on.


,
✍
You cannot perform any other functions until Flash Focus has completed its
cycle. If you perform any other operation while Flash Focus is in progress, the
Flash Focus operation is canceled.