Sony KDP 65XBR2 - Manual (Page 37)

Setting Up the Projection TV
27
Connecting a DVD Player with A/V Connectors
Use this hookup if your DVD player does not have component video
out jacks (as shown on page 26).
1 Using audio cables, connect the DVD player’s Audio OUT jacks
to the projection TV’s Audio IN jacks.
2 Using an S VIDEO cable, connect the DVD player’s S VIDEO jack
to the projection TV’s S VIDEO jack.
To switch between your projection TV, VCR and DVD
❑
Press TV/VIDEO to switch from one input device to another.
✍
An S VIDEO connection will give a good-quality video signal, but if your DVD
player has component video, that connection (described on page 26) will give
an even better signal.
Audio cable
DVD player
S VIDEO
cable
AUDIO-R (red)
AUDIO-L (white)
TV