Sony KDP 65XBR2 - Manual (Page 36)

Setting Up the Projection TV
26
Connecting a DVD Player with Component
Video Connectors
This is the preferred hookup to use if your DVD player has
component video out jacks.
1 Using three separate component video cables, connect the DVD
player’s Y, P
B and P R jacks to the Y, P B and P R jacks on the
projection TV. Use the HD/DVD IN 5 or 6 connections.
2 Using an audio cable, connect the DVD player’s Audio OUT
jacks to the projection TV’s Audio IN jacks. Be sure to use the
same column of inputs that you used for the video connection
(HD/DVD IN 5 or 6).
✍
The Y, P
B
and P
R
jacks on your DVD player are sometimes labeled Y, C
B
and
C R , or Y, B-Y and R-Y. If so, connect the cables to like colors.
Component video cables
DVD player
TV
AUDIO-R (red)
AUDIO-L (white)
Audio cable
✍
You cannot record the signal from any equipment connected into the Y, P B , P R
jacks.