Sony KDP 65XBR2 - Manual (Page 69)

Using the Projection TV Menus
59
Channel
Skip/Add Allows you to customize the channel list that appears
when using the CH+/- buttons on the remote control. The
projection TV maintains separate channel lists for digital
and analog channels.
Digital Select to add or skip digital channels.
Analog Select to add or skip analog channels.
1 Move the joystick V or v to scroll through the
channels until you find the channel you want to
skip/add.
2 Press to select it.
3 Move the joystick V or v to toggle between Add
and Skip . Then press to select.
4 Move the joystick B to return to the Channel
Setup menu, or press EXIT to exit the menus.
Channel Logo Allows you to assign logos to channel numbers.
Channel List Select to display the channel list.
To assign a logo for a channel number:
1 Move the joystick V or v to highlight the
channel number to which you want to assign a
logo. Then press
to select that channel
number.
2 Move the joystick B bVv to highlight one of the
logos. Then press to assign that logo to the
selected channel number.
3 Move the joystick B to return to the Channel
Setup menu, or press EXIT to exit the menus.
Digital Signal
Strength Displays the strength of the terrestrial digital broadcast
signal, to help you adjust your antenna to optimize signal
reception. When the TV is receiving a good signal (the
signal is locked and there are no errors in the signal), the
green light appears. Adjust the antenna
until the green light appears.
Option Description