Sennheiser WiCOS - Manual (Page 32)

Switching the components on/off
30
To switch the access point off :
̈
Set the on/off switch m to position “ 0 ”.
The 3 status indicators ^ go off.
To disconnect the access point from the mains :
̈
Unplug the DC power supply from the wall socket.
The access point is completely switched off.
Max. number of
simultaneously active
microphones To set the max. number of
simultaneously active
microphones in a discussion see page 57
Conference mode To set the conference mode see page 58
Loudspeaker volume To set the volume of the
conference units’ loudspeakers see page 59
Number of interpretation
channels To set the number of the
interpretation channels see page 60
Operating mode of the
chairman units To set the function of the
selection key A
8 and B 9
see page 65
Operating mode of the
access point To set the access point to stand-
alone operation or integrated
operation (slave mode) with
SDC 8200 see page 61
Initialization mode of the
conference units To initialize the conference units
on the access point see page 57
Encryption mode To set the encryption mode for
radio transmission see page 67
Configuration Function/Meaning
Detailed
information
m
NT-AP