Sennheiser WiCOS - Manual (Page 51)

49
Configuring the conference system
Adjusting the basic settings – “ Setup “
Overview screen – “Summary“
The overview screen provides information on the system settings
(“
System Information ”) and the device settings (“ Device Information ”),
e.g. for servicing purposes.
̈ In the main navigation, click “ Setup ”.
The “ Summary ” overview screen appears.
Setting the network address of the access point – “TCP/IP Settings“
The fixed IP address 192.168.0.10 and the subnet address 255.255.255.0
are factory preset. Using this address, you can access the web server.
Setting
Function/Meaning Additional
information
“ System Name “ User selectable name for the network address of the
conference system see page 49
“ IP Address “ IP address of the access point
“ Subnet Mask “ Subnet address of the address point
“ Address Mode “ Address mode of the network address
“ Base MAC Address “ MAC address of the access point
“ Serial Number “ Serial number of the access point see page 67
“ Model Name “ Model name of the access point
“ Hardware Version “ Version number of the hardware
“ Boot Version “ Version number of the boot firmware
“ Firmware Version “ Version number of the firmware
“ FPGA Version “ Version number of the conference units’ firmware
“ RF Hardware 1 Version “ Version number of the transmission hardware
“ RF Hardware 2 Version “ Version number of the reception hardware
“ RF Firmware 1 Version “ Version number of the transmission firmware
“ RF Firmware 2 Version “ Version number of the reception firmware