Sennheiser WiCOS - Manual (Page 75)

73
Integrating WiCOS into a wired conference system
Integrating WiCOS into a wired
conference system
You can integrate the WiCOS wireless conference system into the wired
SDC 8200 conference and interpretation system.
The advantages of integrated operation (slave mode operation) are as
follows:
• the wired SDC 8200 conference and interpretation system is easy to
expand using the conference units of the WiCOS series, which are
wireless and can be placed as you wish
• the WiCOS conference units are fully compatible with the SDC 8200 CU-
M and SDC 8200 CU central units
• all conference modes and voting functions can be used (“yes”, “no”
and “abstain”)
• language distribution with up to 16 interpretation channels
In addition, you can integrate the WiCOS wireless conference system into
the wired Televic TCS 5500 conference and interpretation system. For
more information, refer to the instruction manual of the TCS 5500 system.
Set up for integrated operation
(slave mode operation)
Connecting the access point to the SDC 8200 CU central unit
To integrate the WiCOS conference system into the wired SDC 8200
conference and interpretation system, proceed as you would to connect a
conference unit to the SDC 8200 CU-M or SDC 8200 CU central unit. All
wireless conference units are recognized by the SDC 8200 CU-M or SDC
8200 CU central unit, just like wired ones are.
WiCOS AP
WiCOS AP
Computer
SDC 8200 conference units
SDC 8200 CU/CU-M
WiCOS CV
WiCOS DV
WiCOS C
WiCOS D
SDC 8200 conference units