Sennheiser WiCOS - Manual (Page 64)

Configuring the conference system
62
Monitoring initialized conference units – “Unit monitoring“
̈
In the main navigation, click “ Conference management ” > “ Unit
monitoring ”.
The “ Unit monitoring ” overview screen is displayed.
The following information on the initialized conference units is displayed:
The information on the conference units is not automatically refreshed.
To refresh the information:
̈
Click “ Refresh Unit Table ”,
The information is refreshed.
To clearly identify the conference units initialized with the system:
̈
Click “ Test LEDs ON ”.
The indicators and displays of the initialized conference units light up.
Information Function/Meaning
“ Units initialized “ Number of conference units that are initialized with
the access point and currently switched on
“ Units in init list “ Number of conference units that are manually
initialized with the access point
“ Microphone Number “ 4-digit microphone number
“ Serial Number “ Serial number of the conference unit
“ Status “ Connection status between access point and
conference units:
• “ Connected “
• “ Disconnected “
“ Link Quality “ Link quality between access point and conference
units:
• “ Excellent “
• “ Good “
• “ Fair “
• “ Low “
“ Battery Status “ Remaining operating time in hours