Sennheiser WiCOS - Manual (Page 73)

71
Transporting the conference system
Preparing the conference units for transport
̈
If necessary, unplug the charging power supply from the wall socket
̈
Unplug the connector from the socket for charging power supply.
̈
If necessary, disconnect any headphones connected to the conference
unit.
̈
Unscrew the coupling ring 3 of the gooseneck microphone.
̈
Carefully pull the gooseneck microphone out of the microphone
socket
4 .
̈
Pack the individual components of the conference unit up safely. Make
sure that the components are protected against shocks and humidity.
C CV D DV
X
3
4
CAUTION! Risk of short-circuiting and fire!
If the Lithium-Ion battery pack is transported or stored
incorrectly, it can short-circuit and catch fire.
̈
Make sure that the battery pack cannot come into contact
with small electrically conducting parts or liquids.
̈
Wrap the battery pack individually in material which does
not conduct electricity.
We recommend removing the battery pack from the conference
unit for transport or storage (see page 27).