Installation, Positioning the projector, Adjustable feet – Sanyo PJ LINK PLC-XU106 User Manual

Page 14: Adjustable feet positioning the projector

Advertising
background image

14

Adjustable Feet

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.

Installation

Note:

• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient

lighting in order to obtain the best image.

• All measurements are approximate and may vary from the actual sizes.

Projection angle can be adjusted up to 8.9 degrees with the
adjustable feet.

Lift the front of the projector and press the feet lock latches
on both side of the projector.

Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height, and tilt.

Keystone distortion can be adjusted automatically with the
Auto setup function or manually by using the remote control
or the menu operation (pp.24-25,47-48).

Screen Size

(W x H) mm

4 : 3 aspect ratio

Zoom (min)

40”

Zoom (max)

813 x 610

4.9’ (1.5m)

3.0’ (0.9m)

100”

2032 x 1524

12.5’ (3.8 m)

7.9’ (2.4 m)

150”

3048 x 2286

18.7’ (5.7 m)

11.8’ (3.6 m)

200”

4064 x 3048

24.9’ (7.6 m)

15.7’ (4.8 m)

300”

6096 x 4572

37.4’(11.4m)

23.6’ (7.2 m)

100"

150"

200"

300"

300"

189"

126"

95"

64"

40"

A

3.0’ (0.9 m)

7.9’ (2.4 m)

11.8’ (3.6 m)

15.7’ (4.8 m)

37.4’ (11.4 m)

A:B = 9 :1

B

Max. Zoom

Min. Zoom

23.6’ (7.2 m)

Adjustable Feet

Feet Lock Latches

Advertising
This manual is related to the following products: