Sanyo PJ LINK PLC-XU106 - Manual (Page 43)

43
Image Adjustment
1

Press the Point ◄ button to decrease the contrast; press the
Point ► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press
the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point ◄ button to lighten red tone; press the Point
► button to deepen red tone (from 0 to 63).
white balance (Red)
Press the Point ◄ button to lighten green tone; press the
Point ► button to deepen green tone (from 0 to 63).
white balance (Green)
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
white balance (Blue)
Use the Point ◄► buttons to select the desired Color temp.
level (Xlow, Low, Mid, or High).
Color temp .
Press the Point ◄ button decrease the intensity of the color;
press the Point ► button increase the intensity of the color
(from 0 to 63).
Press the Point ◄► buttons to adjust the tint value to get a
proper color balance (from 0 to 63).
Color
Tint
Note:
• When the white balance Red, Green, or Blue is adjusted, the Color temp. level will change to User.
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.41).
• When Blackboard(Green) or Colorboard is selected in Image select Menu, Color temp . will change to
Blackboard or Colorboard.
Image adjust Menu Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼ buttons to select the Image
adjust and then press the Point
► or the SELECT
button.
Use the Point
▲▼ buttons select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point
◄► buttons to
adjust the setting value.
Selected Image mode
Use the Point ◄►
buttons to adjust the
setting value.
Video Input