Air circulation, Moving the projector, Safety instructions – Sanyo PJ LINK PLC-XU106 User Manual

Page 6: Moving the projector air circulation

Advertising
background image

6

Safety Instructions

Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
– Do not put any flammable object or spray can near the

projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic parts. These areas will
become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause
fire hazard by heat.

Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.

CAUTION IN CARRyING OR TRANSPORTING

THE PROjECTOR

– Do not drop or bump the projector, otherwise damages

or malfunctions may result.

– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other

transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.

– Do not put the projector in a case before the projector

is cooled enough.

Moving the Projector

Air Circulation

Exhaust Vent
(Hot air exhaust)

Air Intake Vent

When moving the projector, replace the Lens Cap and
retract adjustable feet to prevent damage to the lens
and cabinet.
When the projector is not in use for an extended period,
put it into the supplied carrying case with the lens side
up.

CAUTION

The carrying case (supplied) is intended for protection
against dust and scratches on surface of the cabinet, and
it is not designed to protect an appliance from external
forces. Do not transport the projector by courier or any
other transport service with this case, otherwise the
projector can be damaged. When handling the projector,
do not drop, bump, subject it to strong forces, or put
other things on the cabinet.

Air Intake Vent

Air Intake Vent

Air Intake Vent

Advertising
This manual is related to the following products: