Sanyo PJ LINK PLC-XU106 - Manual (Page 36)

36
Image adjust Menu
Image Adjustment
Reset
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼ buttons to select Image
adjust and then press the Point ► or the SELECT
button.
1
 Use the Point ▲▼ buttons select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point
◄► buttons to
adjust the setting value.
Note:
• When White balance Red, Green or Blue is
adjusted, Color temp . will change to User.
• When Blackboard(Green) or Colorboard
is selected in Image select, Color temp . will
change to Blackboard or Colorboard.
Press the Point ◄ button to decrease the contrast; press the
Point ► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press
the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point ◄ button to lighten red tone; press the Point
► button to deepen red tone (from 0 to 63).
white balance (Red)
Press the Point ◄ button to lighten green tone; press the
Point ► button to deepen green tone (from 0 to 63).
white balance (Green)
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
white balance (Blue)
Use the Point ◄► buttons to select the desired Color temp.
level (XLow, Low, Mid, or High).
Color temp .
Use the Point ◄► buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Gamma
Press the Point ◄ button to decrease the sharpness of the
image; press the Point ► button to increase the sharpness
of the image (from 0 to 15).
Sharpness
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Use the Point ◄►
buttons to adjust the
setting value.
Selected Image mode
Computer Input