Input source selection (computer 2: rgb), Input source selection (computer 2, Rgb) – Sanyo PJ LINK PLC-XU106 User Manual
Page 30: Computer input, Input source selection (computer : rgb)
30
Choose Computer (RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Direct Operation
Menu Operation
Note:
When the Input Search function is set to On 1 or On in
the Auto setup function, the input signal will be searched
automatically (p.47).
COMPUTER button
Top Control
Remote Control
1
Press the MENU button to display the On-Screen
Menu. Press the Point ▲
▼
buttons, move the highlight
to Input and then press the Point
►
or the SELECT
button.
Use the Point ▲
▼
buttons to select Computer and
then press the SELECT button.
Input Menu
Computer (RGB)
Auto
Auto
3
When Computer is selected, analog RGB input
source will be selected directly.
Computer Input
Video
Computer (RGB)
S-video
Computer 1(RGB) /
(Component) / (Scart)
INPUT button
Input Source Selection (Computer : RGB)