Sanyo PJ LINK PLC-XU106 - Manual (Page 35)

35
Image Select Menu
IMAGE button
Dynamic
Real
Image 1
Image 
Image 3
Image Mode Selection
Image 4
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select the desired image mode among Dynamic, Standard,
Real, Blackboard (Green), Colorboard, Image 1, Image ,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Standard
Picture mode with improved halftone for graphics.
Real
Blackboard (Green)
Image 1–4
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Dynamic
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode in the Image
adjust Menu (see pages 36-37). This Image memory is
provided in each computer, component, S-video and Video
input source.
1

Menu Operation
Colorboard
Colorboard
Press the Point
► button at Colorboard, and then use the
Point ▲▼ buttons to switch the desired item and then press
the SELECT button.
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼ buttons to select Image
select and then press the Point ► or the SELECT
button.
Use the Point ▲▼ buttons to select the desired item
and then press the SELECT button.
Computer Input