Recording images, If two or three source units are connected, The indicators during recording – Sony MVC-FDR1 User Manual
Page 14
14
-EN
1 1
FINE
BMP
MENU
4 0 m i n
MEMORY
FRAME
Recording images
If two or three source units are connected
The signal input to the CAMERA jack has priority, followed by the S VIDEO jack, and
then the VIDEO jack.
If a camera is connected, only the image from the camera appears.
If both the S VIDEO and VIDEO jacks are connected to video equipment, only the
image from the S VIDEO jack appears.
Adjusting the brightness of the LCD screen (MVC-FDR3/FDR3E
only)
Press the BRIGHT +/– buttons.
The indicators during recording
The indicators are not recorded.
To turn off the indicators
Press DISPLAY.
BRIGHT +/–
DISPLAY
MEMORY indicator
FRAME or FIELD
mode indicator
Number of recorded image
LCD screen birghtness
level (MVC-FDR3/
FDR3E only)
Remaining battery time
indicator
Image quality
Disk remaining
capacity indicator
BITMAP indicator
(This appears only
when BITMAP is set to
ON.)