Sony MVC-FDR1 - Manual (Page 16)

16
-EN
SLIDE SHOW 1 5 / 2 0
FINE
1 9 9 8 2 1 6 MVC - 0 1 5 F
1 2 : 3 0 PM
PAUSE
MENU INDEX 4 0 m i n
BMP
Viewing images
You can view the still images recorded using this unit or a digital still camera on the
LCD screen (MVC-FDR3/FDR3E only) or the TV. You can also play back six images at
a time from the floppy disk (INDEX screen).
To view on the TV, connect the TV as shown on page 7.
Turn on the power and insert the floppy disk.
(1) Press PLAY.
The PLAY lamp lights up.
(2) To display the preceding image, select “ ” with the control button, then press
it.
To display the next image, select “
” with the control button, then press it.
When the indicators on the LCD screen are not displayed, press the left or right
side of the control button, or press
or of the Remote Commander, to
display the preceding or next image.
Note
When the ACCESS lamp is flashing, be sure not to shake or strike the unit. Do not turn
the power off or disconnect the power source.
The indicators during playback
To turn off the indicators
Press DISPLAY.
DISPLAY
Control button
PLAY
ACCESS lamp
PLAY
MODE SELECT
STANDBY
Image number/Number
of stored images in the
floppy disk
Image quality
Remaining disk capacity
Recording date of the
image
Protected image indicator
Slide show indicator
File name
/ buttons (single screen
mode) or / buttons
(INDEX screen mode)
MENU button
INDEX button
BITMAP indicator
appears when BITMAP
file of the image is
available.
Remaining battery time
indicator