Changing the mode settings – Sony MVC-FDR1 User Manual

Page 22

Advertising
background image

22

-EN

FORMAT DISK <OK/CANCEL*>
• Select OK to format floppy disks.
• Select CANCEL to cancel formatting.
Formatting erases all information on the floppy disk, including the protected image
data. Check the contents of the disk before formatting.
Be sure that the battery is fully charged when formatting a floppy disk. Formatting
takes about 2 minutes maximum.

PROTECT
To prevent accidental erasure, you can protect the image.
In SINGLE screen mode:
• Select ON to protect the image on the screen.
• Select OFF* to cancel protecting the image.
In INDEX screen mode:
• Select ALL to protect all images.
• Select SELECT to protect or cancel protecting the selected image.

To do this,
1 Select the image by moving ” with the control button, and press it.

H appears on the upper left side of the image.

2 Select “ENTER” at the lower left of the screen with the control button, then press

it.

Note
You cannot delete a protected image. To delete a protected image, cancel the
protection first.

DELETE
You can delete images you do not want to keep any longer. Once you delete an image,
you cannot restore it. Check the images carefully before deleting them.
In SINGLE screen mode:
• Select OK to delete the image on the screen.
• Select CANCEL* to cancel deleting the image.
In INDEX screen mode:
• Select ALL to delete all images.
• Select SELECT to delete the selected image.

To do this,
1 Select the image by moving ” with the control button, and press it.

The number of selected image changes color.
Press again to cancel deleting. The number returns to normal display.

2 Select “ENTER” at the lower left of the screen with the control button, then press

it.

Note
You cannot delete a protected image. To delete a protected image, cancel the
protection first.

Changing the mode settings

Advertising
This manual is related to the following products: