Sony MVC-FDR1 - Manual (Page 20)

20
-EN
Changing the mode settings
(1) Select MENU with the control button, then press it.
The menu appears.
STANDBY mode PLAY mode
(2) Select the desired item with the control button, then press it.
The selected item changes from blue to yellow. When the control button is
pressed, only the item is left on the screen.
(3) Change the setting with the control button, then press it.
When the setting is finished, the menu screen disappears.
To cancel changing the mode settings
Select “ RETURN” or “CANCEL” with the control button, then press it. The screen
returns to the menu screen. To turn off the menu screen, select “ RETURN” with the
control button, then press it.
Setting the mode of each item
The unit is set to the settings marked with * (asterisk) at the factory.
Items for both STANDBY and PLAY modes
CLOCK SET
Select this item to set the date and time. See page 9.
COMMANDER <ON*/OFF>
• Select ON when using the supplied Remote Commander.
• Select OFF if the unit operates incorrectly when using a Remote Commander of other
equipment. You cannot use the supplied Remote Commander when OFF is selected.
BEEP <ON*/OFF>
• Select ON so that beeps sound when you press the buttons.
• Select OFF to turn the beep sound off.
C L O C K S E T
C O M M A N D E R
B E E P
F I L E N U M B E R
F O R M A T D I S K
B I T M A P
Q U A L I T Y
R E T U R N
C L O C K S E T
C O M M A N D E R
B E E P
S L I D E S H O W
F O R M A T D I S K
D E L E T E
P R O T E C T
R E T U R N