SIGMA EQ Station - Manual (Page 10)

8
FRONT PANEL
POWER On/Off
Heavy duty POWER switch. The EQ Stations auto sensing
power supply accepts 100 to 240V.
NETWORK
Indicates that network is established - as commonly seen
on network connection cards.
ACTIVITY
Indicates network activity - as commonly seen on standard
network connection cards.
CHANNEL - On/off
Overall processing On/off for the selected channel.
In “Off” position the Input signal is passed directly to
Output. Press and hold to activate/deactivate.
PARAM EQ - On/off
On/off for the Parametric EQ on the selected channel.
Press and hold to activate/deactivate.
GRAPH EQ - On/off
On/off for the Graphic EQ on the selected channel.
Press and hold to activate/deactivate.
DYN EQ - On/off
On/off for the Dynamic EQ on the selected channel.
Press and hold to activate/deactivate.
DISPLAY
The EQ Stations bright color display, with 320 x 240 pixel
resolution.
CHANNEL - Edit section
Press to access the I/O levels, Delay and Peak Limiter
functions for the selected channel. This is the Channel Edit
main page. From this page you can select which channel to
edit using the CHANNEL SELECT wheel. When more EQ
Stations are connected in a network all channels can be
accessed and edited from any EQ Stations front.
PARAM EQ - Edit section
Press to access the Parametric EQ pages for the selected
channel. Use the CHANNEL SELECT wheel to select
between all available EQ channels.
GRAPH EQ - Edit section
Press to access the Graphic EQ pages for the selected
channel. Use the CHANNEL SELECT wheel to select
between all available EQ channels.
DYN EQ - Edit section
Press to access the Dynamic EQ pages for the selected
channel.
LOCAL - View section
Gives an overview of the EQ station channels with Output
and Gain-reduction meters, and gives access to adjust I/O
levels and Delay.
GLOBAL - View section
Overview of, and access to edit the channel network
cluster setup. Stereo pairing and naming of channels are
also done from this page.