SIGMA EQ Station - Manual (Page 30)

28
Introduction
(Please see previous page)
Operation
• Select Preset Type; Channel or Scene.
• Select Folder to recall from.
• Select preset within the selected folder.
• Press OK.
That's it !
Delete
The Delete function can be used to delete specific presets.
If protection for the preset is set to “on” the preset cannot
be deleted. (see below)
Protection
Each preset can be overwrite-protected. To later release
the protection of the preset, - place cursor on the preset
and select protection again.
System paramemeters are NOT stored with presets.
These parameters can be stored by performing a
System backup. The System backup feature is
accessed via the Setup page.
Handling Presets - Recall
CONTROL SECTION