SIGMA EQ Station - Manual (Page 44)

42
TECHNICAL SPECIFICATIONS
EQ Station
Analog Input to Output
Connectors:
Input Impedance:
Output Impedance:
Max Input Level:
Max Output Level:
Dynamic Range:
THD:
Frequency Response, +0/-0.1dB:
Crosstalk:
AD and DA Conversion:
AD and DA + Processing Delay Total:
DSP
Internal sample rate:
Internal processing:
DSP power:
Control Interface
Ethernet:
Ethernet passive HUB for network:
MIDI:
Motofader 64 remote:
General
Display:
Finish:
Dimensions:
Mains voltage:
Power consumption:
EMC Complies with:
Safety Certified to:
Operating/Storage Temperature:
Humidity:
Warranty Parts and Labor:
Digital I/O card
Connectors:
Format:
Internal sample rates:
Internal clock precision:
External sample rates:
Jitter rejection filter (4'Th order filter):
Jitter gain:
Interface jitter:
Digital output phase:
Input variation before sample slip:
Processing Delay digital I/O:
Frequency response DIO:
XLR balanced (pin 2+, pin 3-)
11/4 kohm (Balanced/unbalanced):
40/20 ohm (Balanced/unbalanced)
+15 to +30dBu with analog domain scaling
+15 to +24dBu balanced with analog domain scaling
> 110dB (unweighted), BW: 20-20kHz, note 1
< -100dB @ BW: 20-20kHz
12 Hz - 20 kHz
< -110dB, 20 Hz to 20 kHz
24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
1.54 ms
48 kHz, high performance low jitter clock circuit
Routing and processing 48 bit fixed point throughout
600 Million Instructions Per Second
10/100 Mbits/s, Base-T (RJ45 XLR-housed EtherCon connector)
10/100 Mbits/s, Base-T (RJ45 XLR-housed EtherCon connector)
In/Out (5-pin DIN connector)
Custom serial interface (9-pin D-Sub connector)
Color TFT, QVGA 320x240 pixels
450 cd/m2 Luminance
Anodized aluminum face and side plates
Plated and painted steel chassis
19" x 3.50" x 11,5"
100 to 240 VAC, 50 to 60 Hz (auto-select)
<45W
EN 55103-1 and EN 55103-2
FCC part 15, Class B
CISPR 22, Class B
IEC 60065, EN 60065, UL 6500 and CSA E65
CSA File#LR108093
0° C to 50° C ( 32° F to 122° F) / -30° C to 70° C (-22° F to 167° F)
Max. 90 % non-condensing
1 year *
* Up to 2 pixel errors in the TFT display is NOT considered as a
malfunction and does not invoke the warranty.
D-SUB, 25 pole (8 channels AES/EBU in/out)
AES/EBU (24bit)
44.1kHz and 48kHz
+/- 25 PPM
44.1kHz and 48kHz +/- 200 PPM* or wide 30 – 50kHz
< -3dB @ 10 Hz, < -68dB @ 500 Hz, < -100dB @ 1.3 kHz
< 1 dB @ 2Hz
<1ns peak, BW: 700Hz – 100kHz
<1%
-28%>+50%
0.7 mS
20 Hz - 24 kHz @ 48 kHz
20 Hz - 22 kHz @ 44.1 kHz
Technical S
pecifications are subject to change without notice.