Sunwave Tech. SRC-7000 - Manual (Page 29)

Chapter 3 How to Set Up Your SRC-7000
27
Learning successfully Learning fail
4. 5.
4. Press the corresponding key on your original remote for about 2-3
seconds until the symbol shows up on the LCD to make sure
the SRC-7000 has learnt the code.
5. If the symbol shows up, it means that the SRC-7000 has
failed to learn the remote codes. If the SRC-7000 fails to copy the
remote code, please repeat step 3 again.
6. Press the button when you have finished learning all keys.
The preset layout for your device may not match your
original remote completely. Please use “Add Key” (P.
27), “Re-label” (P.30) or “Delete” (P. 33) functions to
adjust the layout.
3.2 Add a Soft Key
With this function, you are able to create new soft keys for your devices.
There are two main stages for you to add a soft key successfully. The
first one is to create a new soft key in your target device. The second
one is to load the specific code for your newly-added soft key.
1. 2. 3.