Sunwave Tech. SRC-7000 User Manual
Page 41
Chapter 3 How to Set Up Your SRC-7000
39
Learning successfully
Learning fail
6. 7.
6. Press the corresponding key on your original remote for about 2-3
seconds until the symbol
shows up on the LCD to make sure the
SRC-7000 has learnt the code.
7. If the symbol
shows up, it means that the SRC-7000 has failed
to learn the remote codes. If the SRC-7000 fails to copy the remote
code, please repeat this step again.
8. Press the
button when you have finished learning all keys.
9. If you intend to use the function to learn another device code, please
repeat step 3~8.
The preset layout for your device may not match your
original remote completely. Please use “Add Key” (P.
27), “Re-label” (P.30) or “Delete” (P. 33) functions to
adjust the layout.