Sunwave Tech. SRC-7000 - Manual (Page 37)

Chapter 3 How to Set Up Your SRC-7000
35
3.7 Pre-programmed Code
SRC-7000 is equipped with a large pre-programmed code database.
With this function, you are able to load the code for your device. It also
enables you to control your device even if you lose your original remote.
1. 2. 3.
1. Press the button for 2 seconds to enter Setup Menu. And
then enter “Code Setting” menu.
2. Choose the “ Pre-code” item and then you will enter the submenu.
On tapping the soft key, you will see the indication for the function.
After reading the tips, please press the
button to go to next
step.
3. Select the required device to load the remote codes.
or
4. 5. 6.
4. Choose the first letter of targeted device brand (ex. “S” on
behalf of Sony, Samsung…etc), and point the SRC-7000 at the
targeted device. After selecting “Brand” item, please turn on
your target device.