Sunwave Tech. SRC-7000 - Manual (Page 57)

Chapter 4 Menus
55
Motion
The Motion Detector will sense any movement and turn on the
Display automatically. Use this function to change the
sensitivity of the Motion detector (Off/Slow/Medium/Fast).
1. Use
or to change the sensitivity of the Motion
Detector.
2. The more sensitive (eg: Fast), the more easily the SRC-
7000 will turn on its LCD.
3. You can use this function to conserve battery power (a faster
setting will decrease amounts of accidental activation).
4. Press to save your settings or press to exit
without saving any changes.
Welcome Page
There will be a welcome page when you use the SRC-7000 for
the first time or reset it.
1. Use or to turn the welcome page feature on or off
(Enable/Disable).
2. Press to save your settings or press to exit
without saving any changes.
Calibrate
Use “Calibrate” to adjust the accuracy of the LCD when the
SRC-7000 touch screen is not as responsive as usual.
1. When you are calibrating the LCD, tap where the “X”
appears (Please refer to Chapter 2.1 P.17 for detailed
information).
2. Press to exit without saving any changes.
Reset
1. If you want to reset your SRC-7000, please use this function
to erase all of your settings on your remote.
2. After you select this function, a message will appear to
confirm your decision, if you still want to reset your remote,
tap “Yes”. This will reset the SRC-7000 back to the factory
defaults.