Sunwave Tech. SRC-7000 - Manual (Page 48)

SRC-7000 User’s Manual
46
4. Select any key in devices for the commands to use for the
Macro. You can save up to 60 commands in one Macro.
5. Select the operation processes between any devices.
6. Select the commands to use.
a. You can press the icon to set up the delay between two commands
from 0 ~30 seconds.
b. You can press the icon to go back to the former command you
selected.
Press the button to confirm the Macro processes setting.
7. 8. 9.
7. Then decide if you will set a Timer for the Timer Macro.
If you select “No”, you can confirm and exit the Macro setup
commands. You can repeat the steps 3-5 to set more Timer
Macros.
8. If you select “Yes”,
You can press the soft key to set the delay time, which
is achieved by pressing the and buttons to set the
hour, or press the and buttons to change the items.
Tap the date
Or choose the weekday to set the activation time for the
Macro function; the section you choose will be in black.
9. Press the button to confirm the settings for the Timer
Macro.
10. If you intend to setup another Timer Macro, please repeat 3~9.
If a Timer Macro has been set, a small mark will be shown
beside the Macro key
If the Macro has been set, this symbol will been shown
next to the Macro key.
If the Timer has been set, this symbol will been shown
next to the Macro key.