Sony D-NF600 - Manual (Page 39)

39
Additional information
Symptom
The CD does not play or
“No disc” appears in the
display when a CD is placed
in the CD player.
OPR lamp flashes on the CD
player when you press a
button, and the CD does not
play.
The rechargeable battery
cannot be charged.
Playback starts from the
point you stopped. (resume
function)
Rustling noise is heard from
the CD.
Cause and/or corrective action
c The CD is dirty or defective.
c Check that the CD is inserted with the label side up. (page 14)
c Moisture condensation has occurred.
Leave the CD player aside for several hours until the moisture
evaporates.
c Close the lid of the battery compartment firmly. (page 32)
c Make sure the battery is inserted correctly. (page 32)
c Connect the AC power adaptor to an AC outlet securely. (page 14)
c Push the 5-way control key toward u (Remote control: Press
u) after one second or more has passed since the AC power
adaptor was connected.
c The CD-R/RW is blank.
c There is a problem with the quality of the CD-R/RW, recording
device, or application software.
c The buttons are locked. Slide the HOLD switch back. (page 25)
c The rechargeable battery is not inserted in the battery
compartment.
c The CD is playing. Turn it off.
c The resume function is working. To start play from the first track,
push and hold the 5-way control key toward u (Remote control:
press and hold u) until the first track starts playing, or open the
lid of the CD player. Or remove all power sources, then insert the
battery or connect the AC power adaptor again.
(pages 14, 15, 32)
c Close the lid of the battery compartment firmly. (page 32)
(Continued)