Kenwood TH-D7E - Manual (Page 13)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
7
OPERATING BASICS
SWITCHING POWER ON/OFF
1 Press the POWER switch (1 s) to switch ON the
transceiver.
• A double beep sounds.
2 To switch OFF the transceiver, press the POWER
switch (1 s) again.
ADJUSTING VOLUME
Turn the VOL control clockwise to increase the audio
level and counterclockwise to decrease the audio level.
• If background noise is inaudible because of the Squelch
function, press and hold [MONI], then adjust the VOL
control. While pressing [MONI], you will hear background
noise.
SELECTING A BAND
Press [A/B] to select band A or B.
• The cursor indicates the current band.
SELECTING A FREQUENCY
Press [UP]/ [DWN] or turn the Tuning control to select a
frequency.
• Pressing and holding [UP]/ [DWN] causes the frequency to
step repeatedly.
• To change frequencies in steps of 1 MHz, press [MHz] first.
The 1 MHz digit blinks. Pressing [MHz] again cancels this
function.
• You can also select frequencies by directly entering digits
from the keypad. See “DIRECT FREQUENCY ENTRY”
{page 45}.
TH-D7 E 07 Operating Basics 98.12.4, 0:10 PM 7